Pinmark™ for combination
The best of both worlds...
The Pinmark™ combination units are ideally suited as bench top devices for small batch runs and individual units. As a result of their compact and robust design, it is possible to create precise designs in the most demanding environments.
With a few minor adjustments the bench top device becomes hand held, so that machinery that is too heavy to move can be marked in place. Simply position the device over the area to be marked and flick the switch.
5/10 K Bench top device
5/10 K Hand held device
Technical Data 3/5 K
|
Dimensions Weight Marking Field Resolution Speed Controller Needle System Power Supply Compressed Air |
300 x 250 x 450 mm 13 kg with table, 3 kg without 30 x 50 mm 0.1 mm Dependant upon mark size UMC 112, UMC eco, UMC box WE3, WE3 long, WP3 230V / 50Hz opt. 110V / 60Hz max 6 bar, 6mm |
Technical Data 5/10 K
|
Dimensions Weight Marking Field Resolution Speed Controller Needle System Power Supply Compressed Air |
305 x 271 x 651 mm 15.5 kg with table, 5.5 kg without 50 x 100 mm 0.1 mm Dependant upon mark size UMC 112, UMC eco, UMC box WE1, WE2, WE2 4mm, WE2 long, WP2 230V / 50Hz opt. 110V / 60Hz max 6 bar, 6mm |
Technical Data 8/14 K
|
Dimensions Weight Marking Field Resolution Speed Controller Needle System Power Supply Compressed Air |
470 x 350 x 525 mm 21 kg with table, 11 kg without 80 x 140 mm 0.1 mm Dependant upon mark size UMC 112, UMC eco, UMC box WE1, WE2, WE2 4mm, WE2 long, WE4, WP2 230V / 50Hz opt. 110V / 60Hz max 6 bar, 8mm |